Call Now: 812-485-5500

News

Evana Automation Ships Dual Press Assembly Cell for Keyless Entry Remotes to Tier 1 Automotive Supplier

Tuesday, 13 October 2015

Evana solution will improve part reliability and cycle time, while increasing operator efficiency and ergonomics

Evansville, Indiana – Evana Automation Specialists, a leading Systems Integrator and builder of custom, automated assembly and test systems, recently shipped a dual press assembly cell for keyless entry remotes to a leading Tier 1 automotive supplier. The Evana solution will improve part reliability and cycle time, while increasing operator efficiency and ergonomics.

The dual press assembly cell is a semi-automatic solution that presses a printed circuit board (PCB) onto a header pin at one station and presses the printed circuit board assembly (PCBA) onto a coil and switch pad at the other station. At press station number one, the operator manually loads the header pin into the part nest. Next, the operator places the PCBA into the part nest and activates the system via a finger switch. Upon activation, the vision camera verifies that the correct parts are in place (via bar codes). If everything is correct, the parts are pressed together and force data is collected. From there, another vision camera verifies header pin height.  If all is correct, the PCBA subassembly is released to the operator.

At press station number two, the operator manually loads the PCBA subassembly into a dead part nest. Next, the operator places a coil into a live part nest and then places a switch pad over the coil before activating the system via a finger switch. Upon activation, the vision camera verifies that the correct parts are in place (via bar codes). If everything is correct, the system alerts the operator to remove the PCBA subassembly from the dead nest and place it into the live part nest with the coil and switch pad. The operator activates the system once again, via finger switch, to verify that all the parts are correctly in place. If everything is correct, the parts are pressed together and force data is collected. From there, another vision camera verifies correct part orientation. If everything is correct, the operator removes completed PCBA and puts it aside. 

The cycle time for each pressing operation is 12.5 seconds, which includes manual loading and unloading.

“The Evana dual press assembly cell adds production capacity and saves floor space,” said Randy Wire, general manager of Evana Automation Specialists. “Most importantly, it improves operator efficiency and part reliability.”

Evana, a subsidiary of Phillips Service Industries (PSI), utilizes diverse technologies to specialize in motion control, robotics integration, welding integration and system architecture by linking production equipment, material handling systems, data collection, networking, as well as computer software and hardware into flexible, unified technology. Test equipment can be integrated into assembly systems, stand-alone systems for automatic testing, or manual test benches. Overall, Evana’s custom assembly and test solutions improve efficiency for manufacturers all over the world in industries like automotive, healthcare, aerospace, defense, and alternative energy, as well as manufacturers of commercial and consumer products.

Follow Evana Automation on Facebook, Twitter, Google+LinkedIn and YouTube.

Note: Preh IMA Automation Evansville, Inc. acquired Evana Automation in May 2016. Read about the acquisition here.
Read 2173 times Last modified on Tuesday, 08 August 2017 14:51
Preh IMA Automation Evansville

Case Studies

We recently helped a Tier 1 Automotive Supplier slash its required equipment floor space by over 50%. Here’s How We Did It.